Hydrolic Oil Seal, Un Oil Seal, Uhs Oil Seal, PU Oil Seal, Polyurethane Oil Sea

• Material: PU
• Application: Pumps
• Type: Shaft Seal
• Performance: High Pressure
• Shape: O-Ring
• Standard: Standard, Nonstandard
• Model NO.: 3A2005
• Color: Blue Color, Yellow, Red, Green
• Surface: Smooth
• Hardness: 90shore a
• Tensile Strength: 50MPa
• Elongation: 650%
• Density: 1.25g/cm3
• Size: Build Mould Per Buyer′s Drawings
• MOQ: 100PCS
• Style: Un, Uhs etc.
• Shape (for Gasket): Ring Gasket
• Transport Package: Packing in Cartons
• Specification: Standard Size
• Trademark: 3A rubber
• Origin: China
• Production Capacity: 1000000PCS/Month

Product Description

Hydrolic Oil Seal, Un Oil Seal, Uhs Oil Seal, PU Oil Seal, Polyurethane Oil Sea


Description: the polyurethane oil seal, hydraulic oil seal are made by injection molding with high quality TPU. It is very good performance of chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. Wider revise hardness range on 85-92shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to all kinds of hydraulic seal, ring and gasket on military, mine, oil field, chemical, printing, punch, paper making, spin, auto industrial for oil, air and water with better tensile strength, lower compressive deformation, resistant hot and cold temperature,

Specifications:
material: virgin TPU
type: UN, UH, UR, GB, GK, KY, NKS, KDAS etc.
color: blue, green, black, yellow, beige, red, brown, beige etc.
surface: smooth
tensile strength: 50Mpa
hardness: 90Shore A
elongation: 500%
density: 1.25g/cm3
elasticity impact: >25%
tear strength: 155KN/m
akron abrasion loss: <0.05cm3/1.61km
compression set (22h*70oC): <10%
working temperature: 120oC
size: build injection molding according to the buyer's drawings
***when you enquiry, pls confirm type, size and quantity***